Here is how I modified my plane to accommodate a camera:
It is important to keep the CG (centre of gravity, determined by putting a finger on each wing and marking the spot where the plane remains balanced and horizontal) in order for the plane to fly well. My CG was right in front of the white lines on the canopy. Using a sharp knife, I cut out a piece of foam roughly the size of my gopro. I saved the piece of foam for later if I want to fly without the camera. Insert the camera and tape it to the hatch. And there you go: a park zone corsair with a go pro on it! (probably it is not a very wise idea to do this because the camera cost several times more than the plane)
No Comments Yet